INSTALLATION
Finishing Touches
Caulking:
Caulk around
sink perimeter and all corners after grouting is complete. Always
follow manufacturers? instructions.
Sealing:
Sealing is
not necessary when using LATAPOXY® SP-100 Grout.
Replacing
Broken Tile:
Always protect
your eyes with safety glasses or goggles when removing tile.
1. Remove
grout from around damaged tile.
2. Using a
chisel and hammer, begin at the center of the tile, chipping away
the old tile.
3. Clean out
the area as well as possible.
4. Spread
a thin layer of adhesive mortar to the back of the replacement
tile and the surface to be tiled. Press tile firmly into place,
trying to make it level with other tiles around it.
5. Allow the
mortar to set completely and regrout around the tile.
